Recent content by DDAS

Was my problem too vague for anyone to help?

:)

Hi Folks Got a Balmoral that fires up and heats up to a certain degree, nothing like it used to, then just keeps switching itself on and off every few seconds. The pump is running and all rads are getting warm. Any ideas? Thanks

sorry for the late reply. I got shut of it and put a new one in.

Hello all I just fitted a new bathroom and had to do some pipe work near the hot water tank. I must have moved the inlet pipe somehow and now water is very slightly seeping through the tank wall, not from a joint, but through the tank wall about an inch above the inlet. Beside changing the...

Thanks Kevplumb Just found website for Main Medway www.mainheating.co.uk

Hello All can you still buy the above or new model? I have done a search online for Main and Main Medway without any luck. A search in forum only returns 1 result. Any help would be appreciated. Nobby

Fairy fluff, I get the message :oops: It’s a Teba TFB 46-51Y. The stat that has gone to the stat grave yard is on the back of the cooker on the right hand side, as you look at the cooker from the back. I think this is a safety stat rather than a temperature control stat, if you know what I...

Chill Breezer, sorry if I upset you. I am looking for a thermostat (I think it is an overheat stat) but I cant find what I am looking for on the sites Google throws at me. I was hoping someone in here might know of a site that specializes in Teba parts or knows if Teba has a website.

Funny Ha Ha, tried that and cant find what I'm looking for. Even looked if Teba have a website and cant find that either

Hi Folks where can I buy spares on-line for Teba cookers? Thanks :roll:

Thanks folkes I think I know what your talkin about :?

I have just been looking at the difference between TN-S and TN-C-S. If the supplier uses the neutral as the earth with the TN-C-S system then why isnt this used with all installations instead of using a separate earth with TN-S or an earth rod with TT ? After all neutral goes to ground anyway...

will the supply company provide a new service head before a rewire is carried out or at least the CU replaced?

quote] it could cause a current to flow but as long as the earth rod is connected with suitable size cable this shouldn't be a problem just as it isn't a problem with the main bonds. I assume you mean 16mm earth cable?