Recent content by deadshort

I would be cautious about cutting the white cable ! Check it is not connected to the consumer unit. DS

My inclination is not to earth the floor sheets or bench as this may create a 'hazard' others my think differently, or have experienced of situations in which they wished they had earthed ! We shall see …. DS

I am in the process of fitting out a welding bay in a fairly large workshop. The floor is sheet metal screwed to the timber floor. My question is do i need to earth the metal floor and metal work bench ? Thanks for any advice, DS

The towels were from a restaurant apparently? More likely to have oil or grease on them, it also would depend on the quantity? DS

If your concerned buy a cheap outdoor socket with a cover. DS

That job looks 'robust' the back box is bushed onto the conduit this is the earth connection. You need to check that the conduit is earthed at the consumer unit end. Have you had the wiring checked ? DS

Hi, it may be the fan that's failed. I would assume the 3 relays are connected the light in each room, the one that is not lit, i would assume the light in that room is switched off ? Also check that fan isolator is switched on, it looks as if its off ? If any of the relay lights are lit you...

Exactly :rolleyes: DS

DS

Take a spur off the 32a breaker feeding the conservatory RF, and add a socket for the WM. DS

Ye, sounds like a plan. That's what i would do, nice and easy job for the weekend ! DS

I second that ! DS

fester :) ! DS

Thanks for the clarification. What was the omission ? DS