Recent content by dextur

Surely it can't be telling you to screw in to the tray?

I have a saneux quadrant shower screen to install. I am struggling to understand what it is showing in the instructions part number 7, 7.1 and 7.2. Any one installed one of these before and can help? http://www.saneux.com/file.php?filename=S4414R/steel%20quadrant.pdf

Hey has anyone fit any of these. Seem a right pain because you have got to adjust the cartridge before you fit so if its closing too quick or slow you have to take the seat back off to adjust the cartridge. Ones I've fit before have all come pre- set.

What size flow and return pipes need to be taken to a underfloor heating manifold? 22mm?

not 12?

Hey what size drill bit do I need for this basin fixing kit, http://www.screwfix.com/p/fischer-wd-8x100-wall-mounted-basin-fixing-kit/77894 It has 2x s10 nylon plugs and 2 x zinc-plated stud screws (M8 x 100mm)

No I just used silicone no washer on top flange. Is it liable to starting leaking if its holding water?

Yes it is, the water Looks abit unsightly though.

Hey I have installed a shower trap that after the shower drains there is always a circle of water around the chrome shower waste. Any one had this before?

When piping up a toilet do many professional plumbers use the flexible connectors with and iso valve on or hard pipe in copper?

Hey if installing a concealed shower on a new build do people pressure test them with the unit in place?

Presume you could connect straight on in plastic if you wanted?

what about unvented hot water cylinders do these need a meter of copper too?

I Know plastic need to be a meter from a boiler. But what about hot water cylinders vented or unvented? Is it still a meter?

And a bypass between the pump and the zone valve to compensate for when the zone valve cuts out and the pump having an over run?