Recent content by Disciple72

Many thanks for the varied responses. I've decided to go with an Idea Vogue 32kW which comes with a full 10 years part & labour guarantee.

Yes I did realise that Main are the budget arm of Baxi, but I've still heard good things of them. How does the Worcester Bosch 30 CDI compaire to the vailant? Thanks for your time guys.

Hi all, I'm in the process of having a new boiler installed after a disastrous 12 years with Baxi 105Ei. To compound the misery I've had to rip out all the old CH piping because I used the no barrier Hep2o which literally corroded my system. I've re-piped everything, put new radiators in...

Many thanks for your reply. This is pretty much what I've done anyway, but it's nice to know that it was the right way to go. Once again, much appreciated :D

I've become an expert and sorted it myself. Job done. I might of even thanked myself if I was able to!

Hello, I'm in the process of installing a 1000 sliding shower enclosure manufactured by Lakes. In the instructions it states that the shower tray needs to be fully sealed to the tiled wall before the enclosure is fixed in Position. The problem is that the enclosure now doesn't sit level again...

Thanks for your reply. Sorry I was a bit vague in my previous post. I've changed the picture above now to add a bit more info (distances). The Pan connector will be coming through the floor right up against the joist on the right, It then needs to go over to the left and into the soil pipe...

Hi all, I've got a bit of a dilema over the best way to connect my toilet via a pan connector to the external soil waste pipe. Any advice would be much appreciated The picture below is of the area I'm working in.

Spot on. Many thanks

I've gone for the solid waste in the link so will have to get a seperate trap. I'm not really limited by space so what would you recommend? Thanks

Great advice and much appreciated. Thanks to you all :D

Totally agree with you guys, not comfortable with this at all but the silver piece in my hand is all one piece and you can't take the strainer out without removing the whole shabang. Taking it back tomorrow and gonna go for the one in my previous post. Would you think this would be ok...

I would have thought that as well, but it needs to be unscrewed to remove the centre strainer, as shown in the picture. I'm thinking of abandoning this one and going for this instead. What do you think. http://www.plumbworld.co.uk/removable-top-wastes-319-0000 Cheers

Thanks very much for your reply. When you say below the chrome outlet rose do you mean underneath the the rubber seal that goes under it? The reason I'm asking this is because you need to be able to unscrew the outlet rose to get to the piece that comes out to remove any hair/soap build up...

Hi all, I've had really good advice off you pro's on here, so I'm back again looking for some more. I'm installing a shower and am about to fit the waste trap. Obvioulsy this comes apart into about 5 pieces. I'm curious about which parts I need to seal with mastic before I jump in with...