Hello all.
I have just removed a built in electrical cooker which was built into an old fire place.
Removed all frame works and took back to original surrounding.
Above were coo why xxker was is a sheet metal plate see picture.
We are putting in a stand alone electrical cooker.
As you can see by...
My question may have sent mixed message. I would call local DNO regarding fuze. The consumer unit MCB are BS3871which are no longer allowed as per BS7671, is the best option fitting a 1way CU 63amp RCD and a 40amp for the 9kw shower.
10mm cable to 40amp double pole switch installed in cupboard...
Hi all been requested to install a shower into house first time I have not had spare fuse in situe normal just stick to upgrading replacing current systems ins fuse system is BS3871 no extra fuse in spare slot so the obvious choice is installing a second consumer unit.
I reckon the system is a...
Hi all
Just had a radiator added to system since the radiators are warm. Would the position of the T in to current system have an effect have attached diagram of pipework. Advice would be welcome.
Were the red is missing sellotape over before adding colour
This is my control centre this is why I was asking. Had issues since it was put in. Was looking at getting rid of links lnt and using it as a 10 way block