Recent content by faircg

I think I have fixed the beeping ! The term is Chime... this isn't shown in the user manual on my keypad... it must have a toggle on or off... also shown with the double knock statuses... The noises seemed to toggle with the use of Zero (0). I have omitted Zone 8 and I think turned the Flag...

Hello, I am after some help please... I have the Accenta G4 Panel and Accenta + Keypad which I have removed off the wall externally rerouted some cables and plastered behind the box... i.e no disconnection of cables. Once back.... and I knew something would go wrong.... upon arming of...

No thats spot on that.... I am off round to see the RGI man now, anyway... Thanks very much for some much welcomed advice :-) I will let you know how I get on.

Is there anyway that I can reduce this over the christmas period... ? Its a pain to get up every 20 mins to reset it... and I take it that its not good for the system me doing that ? Plus when I goto bed its cut off so its cold in the morning...

Registered Gas Installer :-) Is this classed as a overheat then ?

Thanks, I had the boiler man come out today and repressurise the expansion vessel and set back to 1bar... One rad leaked and I think it was due to to much pressure in the system... so as i had to wait... I have been staying at my mum and dads... When running the hot water it also causes...

It is the red LED next to the flame with a line through it.... I do notice as its heating up the pressure rises... its just cut off now and risen to over 1.5 bar...

Hi, I have had a problem with my Baxi 133 HE. The pressure is 1bar so thats normal, the problem is that the water or heating warms up... works for approx half an hour and then cuts off and needs resetting ie the red flashing light comes on. The problem is you cannot reset the system for...

Hi there. I looked last night and I had set my washer off - Hotpoint BWD129 and the same has happened to me. I looked and the power was on at the switch and there is no power at the on/off button. How did you sort the problem you had ? Did you buy a new supressor or just have a play...

Thanks for the reply, I re-presurised the boiler to 1.5 bar this evening and will get the little key thing from my parents tomorrow and try and bleed the radiators to see if that makes a difference. Many thanks again for your reply.

Hi there, I am wondering if anyone can help me please... I have a BAXI 133 HE boiler and when running the shower yesterday the boiler tripped and there was no hot water. So I came down re-set it and then the water just ran at the hottest temperature it could go. I rotated the shower...