Recent content by fine tune

nothing to worry about , just some marks from stiltsons when they first fitted pipe .

the best and one of the cheapest https://www.toolstation.com/multi-stick-grab-adhesive-solvent-free/p38941

....

tony if you put the name of the district council planning in google, go to view or comment in the planning applications website ,it take you to the simple search section put the address in it will show any applications as far back as it goes .

set shower to reqd pressure stick it in a empty bucket for a minute, measure how many litres you,ve got and order the nearest flow reducer

top of page ,comes under faqs

galvanised feed tank in loft/airing cupboard feeding hot water tank rusty inside

https://www.amazon.co.uk/d/9q9/Draper-Expert-68430-4-Inch-Garden-Hose-Connector/B0001KA0FE/ref=pd_lpo_vtph_86_bs_lp_tr_t_1?_encoding=UTF8&psc=1&refRID=QVHCQWT526DGDDXVXXJ4

most likely to be neighbours stoptap where plumber turned off water , stoptap could have a loose washer/jumper , if its only just cracked open the jumper will bang against the seating , go round and turn it fully on and noise should stop

The noise is caused by the water coming out of the four holes in the end cap ok thought you where talking of a sgeal when shutting off , properly be able to seal it, bit of a weak spot had them do it when new .

theres a little flap that acts as a guide, its slipped out of place , if you prize end cap off you can put it back , should be trapped in place with cap. it will not stop the noise though. pm add ill send a new one

seem to to think these anti seize come on every once every 24hr, and can be set to come on at a more reasonable time say 4pm or what ever, by turning power to boiler off then back on at isolation switch at 4pm or what ever and it will come on every 24hr from then .cheers

you can discount the diverter valve , this boiler hasn,t got one,

maybe caused by kinked hose , blocked head, if stats got 240v to it but not out needs a new stat , not resettable, cheers

check overheat stat has not tripped on top of element