Recent content by Fozzy_75

  1. F

    PyronixCloud: Your system hasn't polled the Cloud in 24 hours

    Appreciate the reply sparkymarka! Delayed replying because I’ve been trying to identify a trend… So, if the Wi-fi goes down or the router is rebooted this appears to cause the loss of polling/remote access! Again I enter engineers menu, do nothing, exit and the polling/remote access resumes...
  2. F

    PyronixCloud: Your system hasn't polled the Cloud in 24 hours

    Hi All I keep having the following reoccurring issue; Receive the following email or no remote arming/phone alerts; Your system Alarm has not polled the PyronixCloud for a period of 24 hours. This may be because the data connection to your panel has been interrupted, or your panel may not...
  3. F

    Pyronix indoor cube camera

    Ok I think I have a conclusion for anyone who has arrived on this post with a similar issue. Our ISP is BT and we have a BT homehub router. There is a new BT Wi-fi network in the neighbourhood, providing a full hotspot signal in our house! This is where I believe the interference/unstable...
  4. F

    Pyronix indoor cube camera

    Hi Sparkymarka It’s this camera; https://map-security.com/pyronix-2mp-hd1080p-indoor-wi-fi-cube-camera.html PIR now seems to be picking up movement and sending notifications after switch off/on again! The unstable live view is Radom, sometimes straight into live coverage but other attempts...
  5. F

    Pyronix indoor cube camera

    Thanks secureiam I’ve logged in via the routers IP address, refreshed channels for it to reestablish the best option, seems to have an auto option to find best channel (unless overriding this is a better option?)... Still getting the same unstable message. Looks like camera is sitting on the...
  6. F

    Pyronix indoor cube camera

    Evening... Had a self install system for a number of years and for some reason the indoor cube camera has stopped playing ball. When I try to live view the camera via the pro control app it will climb to 90% ish and say; Network is unstable. Connecting again... Camera doesn’t seem to trigger...
  7. F

    Pyronix procontrol+ Notification problem

    Followed method 1 of the video, sorted! For some reason this was showing the pyronix panel code, any reason why it would have lost the SSID and Key? Or just gremlins? Thank you both for your assistance.
  8. F

    Pyronix procontrol+ Notification problem

    No it’s the digi-WiFi communicator, I will take a look at the video but the camera still alerts me so I guess WiFi connection ok, it’s the arm/disarm and any alarms that the app is not receiving, thanks again.
  9. F

    Pyronix procontrol+ Notification problem

    Sorry handymanjo, mine doesn’t follow that sequence in engineer mode, it’s a 2016 model, software Rev vo2.20a 0002978benforapp. App status on this unit said basic network and not polling cloud.
  10. F

    Pyronix procontrol+ Notification problem

    Thanks again... The diagnostic reported the following; Last app contact minutes 27419 Last polld cloud minutes 12003 Nothing reported as full, the IP address just said IP address, should there be a number here?
  11. F

    Pyronix procontrol+ Notification problem

    Thanks for that Bigsosij, i also spotted the diagnostic/comms check but backed away when asked - are you sure? Is this likely to cause any grief?
  12. F

    Pyronix procontrol+ Notification problem

    Many thanks Handymanjo. Apologies, I know you guys hate basic ‘noddy’ questions, but... I’ll pull the fuse to kill the power, how do you get to the back up battery without alarm triggering? Cheers
  13. F

    Pyronix procontrol+ Notification problem

    Hi All Have a self installed enforcer that has stopped working with the app. I am no longer receiving notifications from the alarm panel, however, the Pyronix camera linked to the app continues to send notifications? When I try to Login into the panel on the app I get a cross and message...
  14. F

    Pyronix - indoor wi-fi camera's - advice please

    Thanks all. I now have SADP software installed on a laptop and can see the camera, got the IP address, placed into the web browser, logged onto the camera and found loads of functionality! Brilliant camera and working well alongside the enforcer in pro control app.
  15. F

    Pyronix - indoor wi-fi camera's - advice please

    Thanks Handymanjo, I'll give that a go, this was provided on disk with the camera, having a MacBook Air with no drive and also the download from hikvision not being recognised as a trusted publisher, I'm once again struggling, I'll dig out an old windows laptop and try that... Frustrating thing...
Back
Top