Recent content by garageboy

any help ? is 0.75 wire ok to wire this up ?? merry xmas and a happy new years :)

can i use 0.75mm wire for this ??? many thanks :)

if i could i would kiss you :) many thanks mate for all your help :) :) and have a great xmas and new year :) kevin :)

hi again, how do i know what the heating on terminal is from my programmer (danfosss fp715 ) many thanks :)

hi i have a danfoss 3port :) many thanks for your help :) :) :)

hi guys :) just brought a danfoss wireless tp5000si and receiver rx1 what do i need to do with the wiring to the wireless receiver ? i know it needs power from the central heating junction box and the old thermostat is a wired danfoss rmt230 so do i need to just take the wire from this...

i cant see anything about the max m2 for outbuilding on the site ?? any helpers : thanks kevin :)

any more help ??? i thought that you can have more than 1 building under 30m2 just as long as the buildings dont cover more than half of your garden ???? any help :)

hi everyone, i am in the thought of building a new garage in the spring/summer. i already have 3 garages at the end of my garden garage 1 is 3mtr wide x 9mtrs long, garage 2 is 3mtrs wide x 6.1mtrs long and i have a sectional garage that is 4.2 mtrs wide x 6mtrs long i want to build another...

hi there, i am about to start a new garage build in 9" brick work, 1, i am wondering to what depth and what width the footings should be ? (the wall run will be around 10meters long * 4meters) 2, also how do i join two damp proof membranes together in the floor slab ? 3, i am going to...

hi again, and any helpers on how close i can build to my fence ? many thanks kev

hi again, the bounce is not really that bad just more noise from that side of the house than the other, i did used to have 1000's of records in the room before i changed it into my son bedroom, so maybe now that i have removed all of the equipment and records from the room the joist need to be...

hi again yes it was passed my building inspector, the wall that i took out had ben muckek about with and it look as though there had been 3 internal door moves over the past 80 years, and i mean a bit of bounce to the floor but only on one side of the beam ???? many thanks to any helpers :)...

hi there, i have knocked through to a new extension that i built with no problems, next i knocked down the wall between my kicthen and lounge the steel i used was 302x102 i beam (i had this left over from the other knock through) i am now finding that the floor on one end of the house seems a...

hi there, i am toying with the idea of removing a setional garage in my back garden and building a brick garage ( 4.2meters wide by 10meters long) the roof will be under 4meters high. do i need planning permission ????? any helpers ?????? many thanks kevin :D :D :D