They stock this local to me
http://www.beacon-electrical.com/firesecurity-cctv/intruder-alarms/control-panels-accessories/accenta-mini-system-g4-led-8sp400a.html
Do I just need the panel or will I have to get the key pad too
Also could I leave the back plate on the wall and change the wires like for like on the circuit board then put the g3 front panel back on so in theory I'm only changing the circuit board
Many thanks for your replies
Ok cheers I'll look at the panel first would this one do the it's for the g3 but not the same model.
http://www.superlecdirect.com/p-8ep416-honeywell-accenta-led-rkp-keypad/
Reset alarm by reset reset same fault as soon as power is turned on and also shorted out panel and rest the nvm
Process of elimination now changing bell box then will look at control panel then wiring
UPDATE - I have called Honeywell support, explained the fault, the support woman told me to power off and power on and do the reset reset within 5 seconds to factory reset it... i'm not convinced.. surely that just factory resets the 2 codes? back to 0123 and 9999
Thanks I will try this. I will try and get this anti code reset too just in case then try and factory reset at the weekend so I am not working on it at night
Much appreciated
Gavin
Yes mate when mains power is turned on I can't silence the outside ringer/ bell the 'reset' or code don't work
Do I need this anti code reset or if I factory reset the whole system and clear any memory will this resolve the issue once I put power on
Yes basically
With no mains power and running on the new battery it's working as expected. Can silence the keypad and the day light comes on solid. I can arm the alarm too.
But as soon as I knock the breaker the external bell rings and can't be silenced with my code or 0123 (in case I had reset...
Yeah I have tried that cheers
Works ok when just running on the new battery but soon as I apply power the outside bell won't turn off..
That's when I read in the instruction manual about the anti code reset
Hi
I am after some help... My battery died and I have bought a new one and refitted this after a few days of having no power going to the alarm.
The keypad buzzer went off and this was reset and silenced.
After I re-applied mains power the main alarm bell sounded but can't be silenced with the...