Recent content by Gobo

  1. G

    Underfloor heating

    I was wondering if it is possible to add underfloor heating into a small kitchen running off the combi boiler. I've seen diagrams on how it would need to be done adding an additional pump, but wondered why this was necessary? There's already a radiator right at the end of the kitchen that...
  2. G

    Mitre saw stand or bolt to bench?

    I would make it so the saw can be moved up and down the bench using clamps, if you bolt it in the middle you will restrict the lengths of timber you'll be able to cut unless the bench is 10 meters long allowing you to cut at a maximum of 5 meter lengths. Other than that there would be no reason...
  3. G

    Diplomat Dishwasher

    My friend dishwasher isn't draining and I'm assuming from reading other posts the most likely cause is it's blocked or the pump is blocked, are both of these pretty easy to sort? I think its a built in, she couldn't see a model number. Thanks Gobz
  4. G

    SHOWER MIXER VALVES

    Simple answer, yes. It might be a bit tricky but definitely possible.
  5. G

    Hotpoint Mistral Fridge freezer

    The fridge compartment has stopped working? Door is triggering light etc correctly. Freezer is running fine. I've heard it could be the thermistor that needs replacing? Help pls!
  6. G

    cutting worktops

    Your going to struggle doing it in place, nothing I know of will cut it all the way to the wall. You can get neat edge blades for your jigsaw the cut down but there hard to use and you wouldn't get a straight edge. Circular saw would damage surface alot, hand sawing would be the only way to...
  7. G

    Wanted- MIG Welder

    Have a look on preloved.co.uk you might find someone selling one on there.
  8. G

    hardwood

    Glad you managed to sort it from there. :)
  9. G

    Concrete Drilling

    You could do with a sds hammer drill, surprised your bosch isn't managing it. Remember there's steel re-enforcement running through the post, If you've hit one of them (normally 4 rods) the drill won't do a thing it will just spin and get very hot.
  10. G

    hardwood

    There's a place in Grantham that may do it if you get stuck they have a few different hardwood, Woodlines 01476561660.
  11. G

    wireless network question

    Have you set up a wep or encryption key/password for the wireless? I had a similar problem with my initial set up, I use the router disc to set up a new passkey for my network and that did the trick. You can also with the disc print off the current network settings to get a print off of your...
  12. G

    Tiling floor/skirting boards

    You could do it either way, no right or wrong. Under skirting would make it a bit easier to tile as you don't need to worry about getting perfect edges as they will be covered.
  13. G

    Mystery MFI kitchen

    What size door do you need?
  14. G

    Noisy Washing machine

    Yeah, I suppose your right. She seemed fine with the noise, I wouldn't be. So I'll just tell her to monitor it. Cheers
  15. G

    Mystery MFI kitchen

    Try searching shaker tongue and groove effect kitchen doors you might find a lead.
Back
Top