Recent content by Handyandy68

  1. Handyandy68

    Bathroom advice

    Is sbr OK? Conscious it's the bathroom. Don't suppose you can reccomend a decent bonding coat for me to use? Lucky we have another bathroom so just taking my time
  2. Handyandy68

    Bathroom advice

    Hi Just a diy dad here. Renovating bathroom. Taken old tiles off and plaster all come off. 1962 house Some very deep to block work Will be using tile backerboards all round. Can i have advice on what to do with wall underneeth. Like Do I need to remove all old debris to block work or...
  3. Handyandy68

    Floor prep sealer

    Great. More than happy to do this. Thanks for advice. Don't supoose you know if acrylic based primer is OK? A good neighbour gave me some a couple of months ago manufactured Feb 2025.
  4. Handyandy68

    Removing rad vogue max 32

    Thanks again. Ideal reccomended turning the central heating setting to off. Thank you for your advice on removal Kidgreen61
  5. Handyandy68

    Removing rad vogue max 32

    Should I turn heating dial off on system. We're not using it? Vogue max 32
  6. Handyandy68

    Removing rad vogue max 32

    Hi If I turned system off and took an old radiator off to decorate, will I need to temporarily cap it off before turning back on? I'll only need hot water for a few weeks so seems I can just turn heating dial off but didn't know if will loose pressure for hot water. Cheers. Vogue max combo 32
  7. Handyandy68

    Floor prep sealer

    Hi Ripped up my old vinyl floor and now wishing to tile the bathroom. I have tile backer boards ready to use The surface is old screed. Bit uneven and dusty Should I seal the floor before installing tile backer boards or should I self level it before using the boards? Room is 4m2 Advice...
  8. Handyandy68

    Plastering these boards not tested manufacturers say

    Hi The manufacturer has not tested plastering on these boards but said they know people have. Any one with experience of plastering insulated tile backer boards? They say They are coated on both sides with a glass-fibrem esh reinforced polymer-cement coating.
  9. Handyandy68

    Inline bathroom vent

    Hi Inline fans... Do the ones with led in the end vent need the led part to be wired to a lighting circuit or does the light take the power from the fan wiring. Cheers
  10. Handyandy68

    Tile backer boards jointing

    Hi Concrete floor and popping tile backer boards on to insulate the floor a little. 20mm boards. Do I tape the joints and if so what type? What compound too please? Will be tiling on top so any tips to prep the floor will be fully appreciated. Cheers Andy
  11. Handyandy68

    Skimming tile backer boards

    No tiles are going on skimmed backer boards. These will be seperate boards for the tiles. All 4 walls will be tile backer boarded (with insulation) but only shower area will be tiled (not skimmed)
  12. Handyandy68

    Skimming tile backer boards

    Thanks. Yes I can plaster straight on. Just wondered the best type of plaster
  13. Handyandy68

    Skimming tile backer boards

    Using 12mm insulated tile backer boards all round for insulation purposes too.
  14. Handyandy68

    Skimming tile backer boards

    Hi. Some will be tiled some will be plastered
  15. Handyandy68

    Skimming tile backer boards

    Hi What type of plaster for skimming new tile backer boards in bathroom. Instructions say boards can be tiled on directly or plastered. No primer needed. Cheers
Back
Top