Just finished a load on it and when I press the on/off button the light flash as they do normally then they just go off right away.
Had the back off and examined the board I can't see anything visually wrong.
Any ideas?
My Triton Opal keeps pumping water through even when the powers off, i have to physically turn the water valve off on the pipe to stop the flow.
I was advised it could be the solenoid so i replaced that, but the problem persists.
Any suggestions? If it turns out to be the PCB i'll prob just...
Yea good point indeed, as I haven't central heating and the shower is electric I only use the hot water for washing up and such.
Thanks for your help guys
I would like to change the control unit for my immersion heater atm its an Horstmann economy 7 quartz but the timers broke on it and i no longer use economy 7.
I just want a replacement switching unit with a timer but want to make sure i get the right one and one that's fairly straight forward...
Need some advice on my heating control unit, at the moment i have an old horstmann economy 7 quartz mechanical control unit and as i know longer use economy 7 and the timer is broke on it, i'd like to replace it.
I always like to try these things myself before i pay someone and i'm quite adept...