Recent content by JamesS01

You could always use 5A switched sockets instead of 13A ones. This would ensure no-one plugged a 'normal' item into the lighting circuit. https://www.screwfix.com/p/schneider-electric-lisse-1-gang-5a-sp-switched-round-pin-plug-socket-white/8806j

If the extra wire is a second loop out then just use a Quickwire Splitter fed from the loop output of the Switch & Load.

Yes, the plugs are there but I'm not sure I can get them out without marking or damaging them. Do you think I can just swap the inside ones for those on the outside?

About 10 years ago I had UPVC doors & windows installed with the front door being a Paladin composite unit. The glazing retaining trims have become severely yellowed on the outside - the inside ones are fine (see attached pictures). I cannot trace Paladin so it seems they may have gone under &...

I'm looking at having a gas stove installed in the living room fireplace & am after some advice on models. I was originally going for a woodburner but since there is gas in the opening & I don't have easy access to wood it's been suggested that a gas stove may be a better option & possibly make...