Recent content by jelboy

Thanks guys, all good comments I have tried the insulation over the window openings, but not to any great success... Had to keep them on... Nails worked but not too well Im stuck at the mo... As you all know, any gap will let sound thru, so even a temporary test doesnt really work Hmmmm...

Basically Im asking whether its better to soundproof the walls or the window??? Any one have exp of this pls? J

GGL *** 3059 window with closed vent flap + shutter open = 56db GGL *** 3059 window with closed vent flap + shutter closed - noise level = 45db Noise level difference = reduction of 11db Thats quite a lot me thinks.. Whst about sound proof board over the existing? J

Hi guys Need some advice pls We recently had a loft conversion done (bedroom & en suite) and are experiencing a lot of traffic noise from the main road 50 yards away.. I am a heating engineer by trade and used to be a sound engineer (go figure) so am aware of the way sound travels and how...

Hi guys I am at my wits end so could use some help please!! I recently installed a WB 24Ri (OV boiler), honeywell 3 port and grundfos 15/50 pump onto an existing system... It was power flushed, naturally, and all seemed fine... filled it with some air issues, but I managed to clear it all and...

Hi guys I am at my wits end so could use some help please!! I recently installed a WB 24Ri (OV boiler), honeywell 3 port and grundfos 15/50 pump onto an existing system... It was power flushed, naturally, and all seemed fine... filled it with some air issues, but I managed to clear it all and...

HI all I have a problem with a Suprima 50. It has a 1999 board on it (the original) but it does go through the motions and does fire up. Unfortunatley it only stays on for a matter of seconds then cuts out... doesnt go to lock out just refires again then repeats, then goes to a flashing red...

Thanks for the useless answer - it doesn't show the programmer wiring otherwise don't you think I might have seen it?

Hi all Please could someone help! I have installed a new fan, a new circuit board and I am exasperated!!! The boiler in question is a Suprima standard efficiency 120 with a Potterton BP2000 built in programmer.. Does anyone have a wiring circuit for this programmer & boiler combination? I...

How do you do that Dave?

Hi all I am working on a Potterton Perfoma 24 HE Pro which ain't working It wont spark goes to flame failure after a couple of attempts.. The fault find suggests the circuit board which I tried and it made zilch difference The fan runs at full speed, pump runs, air pressure switch clicks...

its not really a problem - just a design thing we have a v small down stairs wc that needs lighting and we are trying to make it funky so we thought a bank of spots coming on 1 after the other might be cool..

hi all does anybody know where I can get some kind of delay switch thing to fit to 3 / 4 pairs of halogen spots so that they come on in stages i.e. first pair, 1/2 second gap; second pair, half second gap, and so on.. till they are all on? thanks jelboy

hi all anyone know about this combustion analysis qualification? is it essential? or another corgi money making scam? thx Jelboy

Might chop the lead inside the houes with a leadloc standing by and the kithen tap on.. Live life to the full!