Hello everyone,
I have been checking out the loft for the winter, 1940s purlin roof.
Bad news, only 3x2 ceiling joists and only 75mm of insulation.
The loft is already badly boarded all over so I've removed the boards on the outer sides of the binders and topped up with 200mm but the...
You seem to be trying to make arguments for saving money on hot water somehow without realising that its only 15 % of the fuel bill and the potential savings from reducing your bill is with the 85% which is heating and reducing the flow temp is likely to give you way more savings!
That is not...
Only because I believed the recommendation for the cylinder should be 60c to prevent bacteria growing.
Also if you only need a little hot to a lot of cold then less cold is going into the cylinder.
Otherwise, colder hot water meaning drawing more off so more cold in the cylinder meaning more...
Hello guys,
A question of best practice if I may?
My 25 year old heat only Glow-worm space saver 60BR mkII supplies a fully pumped open vented system plus indirect cylinder.
My questions are, what should the flow temp be set at roughly when the cylinder stat is set to 60 to heat it the...
Hello guys,
New house and starting to poke around.
In the airing cupboard is the shower pump fed from the hot water cylinder.
The hot supply tees of the main outlet pipe from the cylinder so I guess the cylinder is not fitted with a shower attachment, so, When first turning on the...
If you mean the transparent logo as mentioned then do not worry about burn in.
They move them slightly each ad break to avoid this on older TVs and new TVs don't suffer the same.
However for gamers out there that like very bright screens with games that have lots of fixed info eg racing, COD...