Recent content by Joe714

That's what I thought, I take it would be a simple loop in, loop out to each of the new spotlights

.

Hi all, we have 3 spotlights in our bathroom, over the past couple months each bulb has died and we replaced 2 of them with the same bulbs that were in there (installed by previous owner) however today all lights are not turning on, I've jumped into the loft to have a look at the wiring to find...

Shed roof runs into down pipe and into surface water drainage, patio will be sloped away from shed into drainage channel opposite side of the shed

Question, our new patio we're putting in joins onto our shed and will be at the height of the bottom of the spirit level, it's 100mm from the bottom of the shed and the DPM, would it be okay to put the patio in at this height? Should I put in a gravel channel around the outside of the patio...

This is what we are thinking of doing at the moment, for a primer I was looking at Zinsser B.I.N, followed by a couple coats of Bedec barn paint

we want to create the smoothest finish really (I know not ideal with OSB). We will be using it as a bit of a dog room/wash room aswell

thanks, this is solely for interior wood

My main concern is moisture, we will be painting but wanted to know the best way to go about it, e.g. primer, filler, sanding and paint. My mistake, thankyou for the clarification. Yes we are based in the UK.

.

Hi all, I've recently had a new office/garden shed built and the interior walls & ceiling are finished in OSB. My question is what would be the best way to protect the wood from moisture and give it a durable finish? thanks in advance.