Recent content by John4nikki

The red and black connections were wired to the light fitting, I have taken it light off for testing and picture purposes. Can you tell me what connections need to be test on the light switch please. Cheers

Also existing wiring on the rose

Hi probes test on both connections as shown in pic cheers

Hmm not sure, got me thinking I will test all the ceiling wiring just to double check. Loop is live, switched wire is dead, I have a multimeter for testing Cheers

Hi thanks for the replies, I have removed the light switch and tested the wires that directly run into the switch they are dead. Light will work off the loop but would be permanently on Cheers

Hi my kitchen light suddenly stopped working. I have tested the wires into the switch and they are dead, the loop in the ceiling is fine. Don;t think it's breaker related as it just the switch, just wondering if I have missed something before calling in an electrician. Thanks

No I Don't unfortunately, I will test the connections and hopefully that might lead me in the right direction. Thanks for the help

Seems there should be a wire to connect the 1 com to the other to continue the circuit.

Seems there should be a wire to connect the 1 com to the other to continue the circuit.

Will come back tomorrow with results thanks guys

Will do thanks

Only DC tests 240v Cheers

The loop in the ceiling is also fine, I am thinking the cable directly to light may have been damaged in some way but have had no current work done in that area.

Hi Thanks, the contractor terminated the one side light but the Kitchen light has always worked up to now. I have tested the the switch wires and are fine coming in and also with a known working light fitting. Cheers

No checked them as well all good, Have checked the voltage at the Switch good too.