Recent content by johnpgreenan

My bad :oops: it is a carbon monoxide detector not CO2.

thanks for advice. My room has good ventilation, vent at floor level, I have CO2 detector. The pilot light stays on for about an hour, then you can hear an audible click - which is when it goes out. I guess that is the thermo cutting out or failing for whatever reason. There are so many...

Hi, I have a Housewarmer Elegant 2 back boiler (I think). Its been working fine for around 3 years since I got the house. Recently the Pilot light has went out, and when I relight it, it will not stay lit. Now the bolier has not been serviced in this time (I realise it should have...

OK, I took the panel off and the connections were sound at the socket, then when I put it back on it went totally dead...no life at all. I'll have a go at opening up the programming unit to check for loose connections....nothing has tripped at my fuse box all power in the Kitchen is ok. So I...

I'm not an expert, but I'll have a go - I see there is two screws to take the panel off. Won't be till later so I will post later. Thanks for suggestion

Hi, I have a Sunvic Select 207XL panel for my back boiler heating and water. Normally when you just want heating on for an hour you press the 1 hour buttons....the problem is, that now when you press the central heating button the red light doesn't come on - it has a faint flicker -...

Got it off...you were right had to lift the buttons out first then screw was inside. Thanks for that.

Thanks, Easier said than done, I've tried...there is some movement left/right but it doesn't want to unscrew or feel like it should be unscrewing.

Hi, My toilet wont flush, the water is running straight through, so I want to open the cistern to look inside and see if diaphram is split or flush button not connected, but I can't figure out how to get the lid off. Heres a picture... There is butterfly screws under it and I've...