Thanks for the reply
The handle fits onto the side facing away from you on the picture. So the two curved tabs facing towards you are what clip into the door somehow.
But I think you may be right that it's screwed from the inside.
Hi I have a Beko side by side fridge freezer model ASL141w. I want to remove the two long handles on the front but just can't figure out how they come off. I read you have to hit them with a mallet upwards but this doesn't seem to be working, unless I'm not hitting it hard enough? Does anyone...
I did yes but there was a fair bit of water that came out I must admit when I took the cartridge out so I was a bit worried. I had a good look at the PCB and couldn't see any water on it.
It seems to be suddenly working ok tho now strangely!
Hi again, so I managed to get the new cartridge and swap it over. Had a bit of trouble getting the old one out but all done. Only other thing I did was repressurise the expansion vessel.
Only problem is I now can't get any hot water? Central heating works fine but no hot water. Any ideas what...
Ok great thanks for that.
So I think mine is the second version then by the looks of it. It only seems to have the square securing pin and the actuator is round.
I still can't seem to find one online with that part number that looks like it tho
Hi everyone I need to replace the diverter cartridge on my vokera unica 28he but I'm a bit confused by the part number. In the manual the part number is 10025305 but it seems like it might have now changed to 20017597?
I ordered one of these which was listed as fitting my boiler however it's...
Hi
I've got led strip lights under my kitchen cabinets which are all connected together.
The ones I currently have are the colour changing ones so are connected with the 4 pin connectors.
I've never liked them tho as I don't like the white colour they give off as it's too blue and they are...
Just an update. I pushed the the pin in the shraeder valve to get the rest of the water out which wasn't too much more. the boiler pressure was still over 0.5 bar and no air or water was coming out, if it had failed wouldn't water be coming out until the pressure was zero?
I then drained system...