Recent content by jprother

  1. J

    Advice needed PLEASE.

    Hi We finished building our house in December (we had individual contractors in for each trade, not one main contractor) We are now having issues with the tiles on the ground floor, we have under floor heating and liquid screed (screed had been down for almost 4months before tiling). The...
  2. J

    Door liner

    Thanks Roger
  3. J

    Door liner

    My doors need to be FD30 rated does that mean I need to get a FD30 frame too. This makes it even harder to find a 150mm one. anyone know where to get one. thanks
  4. J

    Door liner

    Thanks for the advice
  5. J

    Door liner

    Ah, so you have to dot and dab then. I was hoping to do it but I have never done this method.
  6. J

    Door liner

    Am I missing something, Dry lining a brick wall with door way so the block work is 100mm, 2 battens for each side is 50mm (25mm each side) and plasterboard is 25mm (12.5 ) each side so this totals 175mm with skim will be about 180mm. I am struggling to find a door liner of this size. Am I...
  7. J

    Cooker supply

    Yes its a House :-)
  8. J

    Cooker supply

    5 Kids ;-) and mother inlaw
  9. J

    Cooker supply

    Hob is electric (induction) which will be on island, I have already drawn this from a separate isolation switch along with hood. As to how it connects to CU I have no idea (own circuit or shared) this will be down to the electrician. That's all I am doing is drawing switch/socket positions to...
  10. J

    Cooker supply

    I will not be doing any of the work, I am just drawing a diagram in Photoshop over the plans and I want to have as much of the information correct before sending it out for quotes. Good point with the fault. these are what we are thinking of getting 2 x B45E52N3GB 1 x C67M70N3GB thanks
  11. J

    Cooker supply

    Planning the layout / wiring of a new kitchen (in a new build) and I am unsure if one cooker switch can handle multiple cookers. We are planning to have 2 single ovens and a combi oven installed. Can this be powered by a single cooker switch and 1 cable run daisy chained or will I need 3...
  12. J

    Under floor heating

    Thanks all for the replies, lol at me saying UHF!! was in telecoms 20 years ago. I have updated the drawing adding NRV and strainer, are they in the correct place. Its my understanding that the UFH always needs to be at a base temp so it does not take long to heat up fully, so this would...
  13. Untitled

    Untitled

  14. Untitled

    Untitled

  15. J

    Under floor heating

    Hi all Fairly new here and about to start on a self build (not doing the work myself). I have been getting costing's together and I have some questions on UFH. (lots more questions to follow) ':oops:' My setup will be a combi boiler, UHF on ground with radiators on 1st. Spoke to a few...
Back
Top