Recent content by k0r54

Ok, I will call supplier and try and get the replacement. Thanks guys.

Thanks for the quick response guys! I have taken the actuator off and can manually push the valve in and out (fairly easily). However when the actually is off but still plug in it continues to make the clicking sound (both the new and old one). Does that still suggest the PCB? Would the...

All, I have an Ideal ISAR HE30 (I know they are rubbish boilers before any says :)). Boiler has been fine but today we had no hot water so checked the boiler and it was off, no display anyway. I took the cover off and switched the power off and back on and realised that the divertor...

thanks for a quick response. That is fairly clear so to confirm, If I have joist 1,2,3 and I need to remove a section of 2. I should first put some support planks across the joists. I then make the cut on joist 2 and remove the required piece. I then some joist hangers and attach them...

Hi, Is there a set procedure to installing some stairs? We are having a joiner put some stairs together for us. They are spacesaver stairs much like the one below (banister is on the other side) At present I only have a small loft hatch so i need to cut out 800mm width (to match...

stairs

Hi crank, Thats so much for your help so far. I get the backset from what you said which is http://www.atouchofbrass.com/door-docs/emtek-backset.htm but how do we measure the PZ? I dont quite understand. Sorry if I am just being dim. Thanks k0r54

Hi, Ok, I have taken the mech of the other door only to find NO BRAND :shock: Anyway, I have taken loads of pics so hoping you might be able to point me in the right direction. I did have a good look through the site you provided but could not find a matching on. The top and bottom on...

Hi, No there is no sign of any brand on the mechs on the back door. Would I need to remove it? Thanks k0r54

Hi, Also I popped to wickes today for something else and just stumpled upon this: http://www.wickes.co.uk/Repair-Lock/invt/190767 would that work? Thanks k0r54

Hi, Ok. the vibrating sound is still ongoing. I have tested and I can see an arrow on the TRV that points towards the rad. However this pipe heats up second. This is the same for all the TRV's. Are they all wrong? can I just simply drain the system. (Assume from a bottom rad somewhere)...

Hi, i did upload the pics but for some reason cannot add them to that post. Anyway here they are. I have also looked at the other door but nothing is written on it. Would I need to take it apart?

hey, Ok, I have taken the keeps off and the only thing written on them is 25-530.1 I went to look at our other door that is working and it looks exactly the same. If I take it off from that will I get the manufacture from that? (Providing you cannot recognise it from above). I have...

Hi, Thanks for your help so far. I am not entirly sure what the keeps are however on the frame I can see this stamp engraved onto it: AW 06 8960 They are a little unclear but this is printed around the frame. Does this mean anything? Thanks k0r54