Recent content by kayla99

Thanks for the comment . . . Boiler serviced ever 12 months, covered by British Gas cover, , just wanted to try and remedy the issue quickly, which has now been done thanks to a helpful gentleman on another forum!

. . and the heating needs to be on for the hot water to work

The pressure bar is showing in the green, the lights flash together

We currently have no hot water or central heating ALPHA CB24 Red & Amber lights flashing together To get either of the above we have to do the following . . . Turn hot water tap on downstairs, turn hot tap on in bathroom, (lights still flashing), turn heating dial on, bleed one of the...

Yes, those ones. I have a mixture of finished ones and un-finished but they could all do with a lick of paint. And as i mentioned earlier the sides on the finished ones are not finished. Thanks, Kath

The panelled doors that you get from b & q, which are so called finished, how can i paint them? The edges are not finished and although the doors are nice and shiny and bright they have a few knocks to them. Any help appreciated Thanks in anticipation, Kath

Never heard of the stuff, but shall go and get some. Do I just tile over it??? When I take my tiles off the other wall I am expecting to find the same scenario but that's going to be on an internal wall, what will I have to do there? Many thanks

I've removed the tiles in my bathroom to re-tile. In parts the plaster has come of as well but only patchy the remaining plaster is solid. I'll try and explain better, bits of pinky plaster has come off, the remaining pinky stuff is solid but behind where it has come off the walls are grey, no...

Sorry, but how do i flush it??

Thanks for the prompt reply, if you're still around is it easy to do? Do we need to flush it first? Absolute novices!! Thanks

Asked for some help last night about installing a radiator, and with some help have succeded. So many thanks to the two who posted some advice. Next question is, now that the radiators are installed do we need to flush the system [combi] and does it need a cleanser adding? If we do have to do...

Want to move a radiator by 6 inches but this means having to shorten the pipes. I beleive I'll have to drain the combi system to do this, any advice that you could give me? Thanks