Thanks very much guys, there are some very good solutions there. It will be after Christmas when I get to concrete it now and will update this post when it's done. Thanks again and Merry Christmas all
Hi
I'm putting in a concrete slab for a large workshop at the bottom of my garden. There is only access from an adjoining field 9 metres away from the centre of the site plus with a 45 degree slope from the field boundary to the site ground level 1.5 metres below. A concrete pump is very...
Hi Doggit
Yes that's correct. P is the Program key and I had programmed zones 2 & 3. Program 2 is a part set and Program 3 has a different exit zone.
However, your reply has prompted me to double check programmes 2 & 3 and I've discovered that I had the exit modes set to disabled. Having set...
Hi all
I'm new to this site.
I have just fitted the above system and during testing I find that I can't access programmes 2 or 3 when setting the system. I enter the code followed by 'P' but the exit tone doesn't stop, and I can't select program 2 or 3 Any ideas?