Recent content by kirkgas

  1. kirkgas

    Boiler Flu Regulations?

    Muggles, there isn't any debate,the manufacture over rules everyone on their own appliance
  2. kirkgas

    gas pipe connector for cooker

    This thread is ancient
  3. kirkgas

    Notifying Gas Safe of boiler install

    Phone Gas Safe customer services and they will check whether it is done or not
  4. kirkgas

    Gas meters

    There are better ways to introduce yourself haha
  5. kirkgas

    Gas meters

    The pressure in my street is less than 75mb The difference between an E6 and a G4 is: And E6 has an E and a 6 in it's name, I'm going to leave you to,work out what a G4 has
  6. kirkgas

    FGA printout

    Richard what does the cost of calibration have to do with the regs? Why bother with a printer anyway? Either invest in good soft wear that links to iPad etc or take a pic of the screen and email the result to your own file and the customer, easy peasy,
  7. kirkgas

    Pressure refleif pipe - routing

    You can't drill through a lintel, it could weaken it
  8. kirkgas

    Pressure refleif pipe - routing

    You can't drill through a lintel, it could weaken it
  9. kirkgas

    Gas regulations regarding hob to kitchen wall unit spacing

    Agile, apologies if I've misunderstood what you have said, but I think you are saying that the the extractor needs to be 760mm from hob PLUS it needs to have a 50mm gap either side as well? The 50mm step back at each side is only required if the wall unit is less than 460mm from Worktop, if...
  10. kirkgas

    Gas Meter Move

    No it doesn't, as long as it is joined properly to the steel and adequately supported, your kitchen fitter is talking mince
  11. kirkgas

    useless scot

    I'm just waiting on the SNP and YES campaign blaming Westminster
  12. kirkgas

    best route for circs

    Hope you can see this
  13. Untitled

    Untitled

    Where you can cut joists for pipes
  14. Bs6891

    Bs6891

  15. kirkgas

    best route for circs

    Sorry, but the advice of just take the easiest route might not be correct, there are detailed explanations and dimensions of where joists can and more importantly cannot be cut, I know 99% of those fitting rad pipes will ignore or not even know of the regs but they are there just the same! it's...
Back
Top