Recent content by krisrt

I'm going be fitting an epdm to a new flat roof my only issue is that I have a soil pipe going up through it which is secured to the wall with the usual brackets so approx 30mm from wall. I found lots videos online of how to fit the rubber shrouds but they all show the pipes conveniently in the...

Can these beeps be made quieter or silenced? I'm asking as I'm going to put it on landing and at 5.30 in the morning I don't want to wake everyone up.

I think I'll just bite the bullet buy another panel for front door and put main box upstairs on landing. Question though does the v10 buttons beep when pressed? Or when arming and un arming?

Thanks for clearing up the unswitched spur and yes I was thinking that it would get switched off. What do u mean by "always the above"? Thanks

I have already spured off the socket by front door when I was renovating to put another socket on other side of wall. Unsure what unstitched means? I know it has an internal battery but Would it really be OK to plug it in? Thanks

I'm trying to find the best location for my v10 unit however I'm unsure what to do best with the fused spur as I've read different things. Do I put it next to Consumer unit and run a cable direct however this will cost me extra as I will have to purchase another key pad for front door? Put it...

Do u know if you can add pirs or other accessories into the above kit? Thanks again

Unfortunately I never thought of it then only now many houses have been broken into its become a priority

Are u referring to the enforcer shock kit 5?

Cat, a lively one at that at times too. At a push I could run cables but It would be a last resort as I've just refurbished my property.

Hi I'm looking to purchase a wireless alarm system shortly. I was initially looking at the yale products however quickly moved on from them due to the terrible reviews. I'm now looking at a more up market alarm from the likes of pironix texecom visonic scantronic etc however there are so many...

Thanks again Hugh. Just looked up the osma square rodding eye omg there's a price.

Great thanks im in need of a square rodding point like this (which goes straight down) however im having trouble sourcing one. All that I have found are angled which won't work with my layout.

I need to go 90 degrees to clay pipe so would this be best option. A Y fitting spliced into clay then a 45 to bring it back into line?

Sorry second question should I use a Y connector or would a swept T be ok. Regs guy wasn't clear on that one.