Recent content by leu96drm

Thanks Tony for the confirmation. I'll definitely ask for it to be pushed deeper - and will certainly mention the numbers and recommendations here. A cover slip is preferable but the pipe goes along one wall, then through a supporting wall and across the back entrance, so it'll look...

Thanks alot Tony! A section was dug out to expose the old, smaller pipe and the new, bigfer pipe put down. Problem is it is just below the surface and will be covered by 5mm screed tops. Of course it'll crack as its in the utility room across and right infront of the back door which has heavy...

Hi all I checked the faq and couldn't find the answer, and a search leads me to older responses. Would appreciate your help. I'm having a new unvented system installed which requires the existing gaspipe being enlarged/replaced. This means digging up some screed. Once replaced, does...

Woody thanks but this doesnt clarify specifically re my question on regs. Structure is still standing but I'd like to know what regs at the time suggests re the required width. In another room the floor on the right is lower than the floor on the left by 25mm and the centre is 35mm lower...

Hi all, Hope you are able to help. During some renovating I found the joists on my ceiling/floor are 1.5" wide by 8" and spaced every 15/16". I was surprised as the minimum width I've see people refer to is 2". Does this suggest my joists at 1.5" are not thick enough/conform to...