Hi Guys. I had a look at a leak for a mate,
He has an old asbestos soil stack, and the boss (joining the bath waste to the stack) has snapped!
Any idea for fixing this without replacing the entire stack?
Maybe you've turned the stopcock on further than it was before increasing the pressure causing water hammer? Or where its been turned off and on, if youve been doing work on the system its a possibility of an air lock.
Some has asked me to paint a cast iron drainpipe.
The older paint on there is flaking off so i take i i should rub it all down first.
Is there any particular process to follow or is it just rub down and paint?
Ok guys, thanks to all of you =]
learnt a bit about what to use, and your opinions on this.
Didnt think it would turn into such a large debate.
But thanks for your input guys! If i had the time to thank you all i would!!
OK i started this topic and haven't had a input yet. To me it sounds like a bicycle helmet..
Some people like to wear it to be on the safe side.
Some people don't wear one because it makes you like a spanner
PTFE Translation:
I'm going to use it just to make sure
I'm not going...
Thanks for the response guys,
I was thinking of taking a look under the bath before i do it to check the supporting legs and floorboards to see if theres any movment.
If i find there is movment there can i raise the legs a little and slide a board or some battons under there to spread the...
Hi guys,
My parents decided to let a painter and decorater to fit a bath a few years back! The seal around the bath just dosnt stick, bit of a problem when where having showers as the water finds its way down the side of the bath into the kitchen, Tried re-sealing it numerous times but always...
Alan seams to think strongly about this :P
I remember when i was in college, a boy done it on a gate valve, tapes up the threads, i remember my tutor said something about it stopping the olive from compressing.