Recent content by Mark Tomas

Hi all Noticed today damp patches in each corner of window top and bottom window was fitted 3 yr ago Reveals were plastered 6 month ago Any clues please ?

Thanks all !!! (The clamps did it)

Hi guys Roof was replaced 2 years ago gutter clips set in place drip trays scewred on top Then tiled, however the clips weren't set properly and theres hardly any run off along The gutter so I taken the gutter off however I carnt get to the screws on the gutter Brackets.....would it be ok to...

my bathroom is very cold even in summer no sun through window at all to warm it up Even last nite at 9pm was cold had the log stove on living/kitchen so both rooms Warm.....not putting central heating on just to warm the bathroom So was looking at underfloor.....question is I have a concrete...

Hi I have a electrician friend to do it....

Ok cheers I understand But if this could help Need a camera for 50m at back one camer for 30m at front And two 20m cameras for each side need 2tb And would like exallant nite vision.....

Hi thanks for the quick response Yes pitch black....open fields So if say you were to live here What would you recommend with Distances I've given.....thanks

Sorry forgot to say....around the £500 mark if that's possible ??

hi all Looking for a 4 camera kit for my property....detached bungalow in open Rural ground...front of house to front gate measures 105ft width is 100ft each side...the Back measures from kitchen window which I want to put on a 3metre pole...I.e my tv pole.... its centre of house and measures...

Cheers width is 200 mm and longest part is 50m thought of cutting The 5m in half so its more easier for me to fit... not sure if That makes sense

hi all....sofits on new build 10mm hollow or 10mm solid £10 for a 5m length of hollow or £22 for solid What would you choose and why (p.s if it was your place).....cheers

£434 for 100mm and £528 for 200mm (wickes) need to cover 200sqm

Rafters 100mm deep need 200sqm to do the job....she doesn't Want to pay for cost of 100mm on bottom and 200mm on top So do I just put the 100mm down or put 170 or 200 down she Only wants 1 layer to keep costs down ?.

Sorry not rafters.....joists

Cheers....will need check, so if say rafters 100mm deep then its 100mm infill then 100mm On top or 170mm....could I get away with just the infill of rafters to save costs would it Be adequate