Recent content by mattyashy

If I can get away with 1.5mm that'd be a godsend - fitting 2 x 2.5mm cables into one terminal on the timer is a bastard

Yep, both are 3kw.

In another thread I was helped out with wiring a timer that had been wired incorrectly. I now realise that I need to change some cable that has gone rotten, plus one of the flex cables is just about long enough making it fiddly to wire in. The current setup is: Heatae Sadia Megaflo HE + a...

The current cable is 1.5mm.

I just tried it - the timer works when I moved it across.

Just to check - this cabling is okay? https://www.screwfix.com/p/time-3183tq-white-3-core-1-5mm-flexible-cable-5m-coil/28239

I've got it working, thanks. Lucky I checked this. The cable was stretched to the maximum to reach the timer from the tank. And the earth insulation on the bottom immersion had gone rotten. Off to get some new cable I go.

Yeah, there is a link already from L to 1 - just hidden in the pic.

I have an immersion timer that works, but not on the timer setting (if that makes sense). The immersion will fire no matter the switch position (on, off or timer). But the timer does not work - if the timer is set to 'off' at a specific time, the immersion will still turn on. I have a...

I have moved into a new flat. It is fully electric. I have a Heatrae Sadia Megaflo tank with immersion heaters (top and bottom). There is a separate Timeguard NTT05 timer for each heater. I'm trying to figure out how it works. It seems that no matter the switch setting (timer, on or off)...