Recent content by mb21

Thanks for the replies, to answer location I am in England. So based on the responses UFH is not notifiable. Have run the fused spur myself but was planning to get certified Electrician to sign it off and do the Part P notification but checking what needs to be done or not.

When I looked into this a couple of years ago it was notifiable under Part P. Checking the updated rules it seems to state that it is not notifiable "unless a new circuit is required". Am I right in assuming this is a new circuit from the consumer unit and running a fused spur off an...

Hi there, Planning to replace our kitchen floor with tiles, particularly like these: http://www.toppstiles.co.uk/tprod42569/section-1/Yorkstone-Modular.html Don't want to come downstairs to cold tiles in the morning so want to fit an under-tile heating system and looking at the Warmup...

Other side of wall is outside, above is ensuite bathroom. Was indeed planning on putting a blanking plate over the junction, would probably change the steel back box from double to single so a single stainless blanking plate would not look too bad behind the stainless range and think that...

Thanks, just noticed the isolator actually has a crack in the body so probably should be replaced anyhow. House is Brick/Block with plasterboard onto the block, with the tiles it should be possible to fit a steel knockout box onto the blockwork and run cables into the gap between plasterboard...

To introduce myself I started my career in Electronics repair 20 odd years ago repairing computer equipment/monitors etc and have assisted electrical installations into computer rooms so no stranger to electrics. Doing some minor changes to our kitchen which includes moving a few units around...