Recent content by md45

  1. M

    Low hot water pressure

    Update.... Its fixed! So i shoved steel cable down any hot water and feed pipes i could... no real findings. I then switched the cold and hot feeds on the pump to the shower (just changed which side of the pump was pumping hot and cold) I put a slightly larger pipe on from the water tank...
  2. M

    Low hot water pressure

    Thanks for the suggestions.. tried both and no joy.. There is water in the cistern and I've pushed the cold water through from bottom tap, top taps and through shower head What would anyone be checking or doing next? Thanks in advance
  3. M

    Low hot water pressure

    Hi all I have a a boiler with separate hot water tank, and a water tank in loft.. had no issue with hot water pressure for years, Then kitchen tap (down stairs) lost hot water pressure to a very slow trickle, I put up with it for a few months but now I have issues upstairs whereby the shower...
  4. M

    Nest 3rd Generation install - Ideal Logic 24 boiler issue

    I had a similar problem on a y plan system and after having a few day's headache and getting some advice on here about wiring etc, i decided to get a nestpro to come and look over things... he found that the heatlink was faulty and wasn't switching the heat off...
  5. M

    Nest gen 3 - Y plan - fitted but heating will not switch off

    Stem, thanks for taking the time to give your advice, to have someone in the know give their opinion is a massive help especially for someone like myself who has hit a wall and doesn't have the knowledge to investigate the problem, so i decided to contact a 'nestpro' and one of them came out to...
  6. M

    Nest gen 3 - Y plan - fitted but heating will not switch off

    Stem, I haven't changed anything else and haven't blown any fuses, when i put the old system back together and remove the nest it works fine, ive only ever wired it as per the picture and instructions so im thinking it cant be down to me doing anything wrong and can only be a fault with the...
  7. M

    Nest gen 3 - Y plan - fitted but heating will not switch off

    wildcat 1961 - thank you very much for your helpful input
  8. M

    Nest gen 3 - Y plan - fitted but heating will not switch off

    Hi Stem Thanks for the reply, Yes the heatlink has replaced the old programmer. the two wires coming out of terminal 2 are both loops, one leads to live and one leads to terminal 5 (sorry the image isn't very clear) The wires were fitted better than that (honest!) i took the picture just as i...
  9. M

    Nest gen 3 - Y plan - fitted but heating will not switch off

    Hi everyone, So after reading the many other threads about problems with the nest, i cant find any issues which match mine. I'm pretty sure i have a Y plan system and that i have wired the Nest correctly, after wiring it in the heating and hot water all come on but the heating will not switch...
Back
Top