Recent content by mdcarlile

Yes working perfectly prior to the pull cord issue. No burnt/scorch-marks on the old switch. So its possible that i have left a loose connection on the new switch? Cheers Mark

Hi We have recently been having issues with our Mira Sprint 8.5 kW shower. The pull cord power light would"go-out" when the shower on button was pressed - I replaced the pull cord and this allowed flow from the shower. However, the water does not heat and is only warm even on the highest...

Many many thanks!! M

OK thanks for the advice. I'll have a look - to be honest there's a chance I'll just change the oven for one that fits a bit better (like my old one that has maybe 25 mm to spare at the back) Cheers Mark

Yes it is (?)

Yes it does - I was just trying to explain these flex outlet plates things to my wife earlier. So do you think this would be a good idea? Will the plug get damaged if it is touching the oven? M

It is slightly raised away from the wall - like a normal (at least in my house) electrical socket. So not flushed. M

Hello, I have just replaced my electric oven but have realised that the back of the oven is touching the plugs (normal 3-pin type) for the hob ignition and the oven itself. I'm thinking it will probably be fine but would like some advice if possible. Many thanks M

No it doesn't seem to happen/get worse when going around a corner. But thanks for the information. Cheers Mark

Hello For the past week or so I have been getting a strange sound coming from my Renault Scenic - it sounds like a cricket (yes the insect kind) and gets louder periodically. The sound totally disappears if I press the brake. Any advice on what this could be would be great 54 reg 1.5L...

Can you bung a 3-way valve? Thanks M

Hello, I am currently trying to replace a 3-way motorised return valve to my CH/HW system after a failure of the motor (Siemens). I have searched the internet and local plumbing outlets for a replacment motor so that I can easily swop it over without changing the valve itself. However...

Thanks for the information. How much should I expect to be paying for the wheel bearing job - should this be the case. Many Thanks Mark

Hello, I have question regarding my 54 reg 1.5L diesel Renault Scenic (35 000 miles). I have started to notice a strange sound when traveling at speeds above 50 mph (it maybe present at lower speed but is too subtle to hear). The sound is kind of a dull hum like the engine (or somethings...