Recent content by me2u

ok this is the info on the back of the cooker 220-240v 50hz 5290w 14.5kw so should i change the 2.5 mm to both 10mm cable? how would i go about connecting the cooker to the power supply cheers

will get the rating tomorrow.

45amp mcb. the 10mm cable runs from cu to the cooker control unit (the 1 with red switch and a plug) . dont know the rating of the cooker but its a range double oven . can find out. what it was the guy from labc said why dont you put a plug behind the cooker so you can plug it in...

i have installed 10 mm t+e cable from the cu to the main cooker switch. then from that socket i have run 2.5mm cable to a socket which goes behind the cooker is this ok? or should both lengths of cable be 10mm. the cooker wiring instructions says it has to be fixed wired to the wall . so i...

so what you are saying is take the power from the light /ceiling rose. run to a isolator then to a fuse 3 amp then to the fan ? is this ok is there any other wayof wiring it which i could use the power from the ring main to the fan?

hi ,my brother has brought a extractor fan which was a wall mounted fan with a pull cord switch . after a few months he went to fit it but at that point he realise he had brought the wrong one . he wanted a ceiling mounted fan instead. i have taken apart the fan a cut off the pull cord...

hi all, 1) the old consumer unit has 10 mm earth cable which goes to the meter . as i am moving this should i just buy a longer 10mm earth cable. (tnc-s system) 2) i am using 6mm earthing cable for the bathroom . to earth together the bath , sink toilet etc but it i have wire it to a...

im from birmingham

hi all, im currently rewiring my brothers whole house. i've done a electrical course back in 2001. the problem is i have forgotten alot of it since i work in a different field now. the guy from the council came out today to check the 1st fix. he came out with some issues. 1. their were...