We have a lean to conservatory with a glass roof. The MD has decided that she needs an overhead light [as opposed to a wall mounted light] to better illuminate the table when she plays mahjong with her friends.
I have sourced a lightweight 6' LED batten which appears to be ideal, spanning as it...
Thanks to everyone for assisting with this problem but took the driver to an electronics guy this morning and he diagnosed an intermittent fault. I will have to wait for the new driver to see if there are any further problems..
Yes, done that and checked the driver is sending power to the panel but due to measurement difficulties I can't quote the actual output but when I bench tested both with a wall socket supply it works fine....totally confused..
I have replaced the hanging light on the upstairs landing with a 60x60 surface mounted LED panel.
It is on the usual stair 2way circuit but following installation fails to illuminate using either of the switches. The 2 way circuit checks out OK and the panel works OK when connected via the...
I wonder if someone would be kind enough to give me some pointers. My 1970's house has a low slope roof which is concrete tile over a bitumen type underfelt. We have been getting some slight water leakage through the roof and I have noticed that the underlay is sagging 40 - 50mm on the lower...
Having had problems locking / unlocking my upvc front door over quite a lengthy period I found after stripping the locking system that the machine screws which hold the lock and catch boxes together had worked loose. Tightening these [with a drop of loctite just to make sure] has - touch wood -...