Recent content by michaelcouper

My Uncle passed down some felt for my wooden Garage/Hut. Which turned out to be Polyglass torch on stuff. Ive no idea how to go about this. Ive managed to locate a shot of a torch but unsure wether to: 1. Remove existing ripped felt 2. Torch the top of felt or below it 3. Torch entire felt or...

i have a two bedroom flat with a back boiler. i am going to change this for a combi boiler in the loft. flat consists of 2 small radiators, 4 medium, 1 large, 2 sinks and 1 mixer shower. i was hoping to spend around £600 on the boiler itself. can someone recommend a good manufacture?

Thanks for reply. its an acrylic. the screen was push the wrong way and fell off wall, so i was told anyway. it does hav an electric shower so would like to get something in place even for couple of month just so they can get the use, wasnt going to run baths as such. the hole is...

I own a flat where the shower screen has fell off and put a hole (size of 5pence piece) in the bath. I would like to avoid replacing the bath as it is between the wall and cupboard (very akward) and at the risk of damaging tiles. Ive looked for repair kits online but these seem to be for...

yes door is 380 frame is 95mm so door can be any size really, not panel prob flush, tho im open to suggestions

i am needing a door to fit a small space can any one tell me where to get one so small or how to make one please? 380 * 1950 thanks

hmmm, so not as simple as cutting square out and square in, im glad i asked. i am pretty handy tho carpet is pretty basic, large room tho so would like to repair as to replace. i dont really know what a heat seam iron is :-/ plenty of time off to do this repair and willing to spend a...

you wouldnt wire a 10kw shower in 6mm, just saying good practice

id personally have 2 circuits! you could argue if its a short run, but just good practice don't re use the connector block use one of these http://www.screwfix.com/p/volex-cooker-outlet-plate/50538

I own a flat where there is an iron burn, tenant was at fault but wants new carpet, to keep the piece I thought I could cut a square from the cupboard and swap them. Is this possible, and are there any handy tips or techniques any1 can share thanks in advance

thanks mate, theres no load, usually two of us in it, occasionally 4. ill stick to manual then

my fiesta zetec 1.25 manual says front tyres (31) back tyres (26) but tyres on car says max 36. what pressure sounds best? thanks in advance

not sure about cable it does seem to be fairly decent, at least mid range. wat would be the best aerial to put up? aerial seems dated. not a good local signal from local knowledge. [/img]

cheers chris, if money was no object i would get folk to do it for me but as times are hard, i done this myself. i was under the impression the black stuff was accaptable as it seemed to work with brown stuff previously. can u maybe let me know where to get decent stuff or what stuff to buy?

cheers mate, ive used black coax, i dont suppose thats made any odds, how would i identify a dated areal, will try rotate it slighty but its been there for a while and can only assume it worked before i bought the house