What's the best way to remove the Fischer Duopower Wall plugs? They've been put in a plaster cavity (on the ceiling part of a bay window for a curtain rail). I've tried removing by putting a screw in slightly and levering out with a hammer as with a normal wall plug, but they don't budge and I...
I started off using what I thought was an average amount but seemed to bubble. So I ended up putting lashes of the stuff on the paper and some on the wall but it has peeled off too. The paper is lining paper 1700 grade. I soaked it for a good 10 minutes, as it said on the label - there was one...
I didnt apply PVA over the skim. I applied a size mix and then the wallpaper which is falling off after 24 hours. I did PVA the walls before plastering - the plaster seems sound so I dont want to do anything to ruin the plaster.
Should I apply PVA or diluted matt emulsion? Not sure what to do.
I have recently plastered the walls in a room (not a brilliant job but good enough to be lined and then painted). I waited a couple of weeks then sized the walls and allowed to dry. Whilst I was hanging lining paper it didnt seem to be adhering well so I pasted wallpaper adhsive onto the walls...
No I dont get any faults showing up (though there isnt a digital display). The pressure appears ok (between 0.5 and 1.0 when off, going up to about 2 - 2.5 when hot then it does go back down gradually when the boiler cuts off).
I also had it desuldged recently because I was told that might be...
I really help someone can help.
I have an Ideal combi boiler and it fires up ok until it hits temperature and cuts off, it then wont refire up until I switch it off and on again (sometimes I need to switch it off up to 3 times before it will fire up). The boiler still runs (I can hear...