Hi
This started a few days ago where I assume the dishwasher tripped RCD (nothing else particularly on at the time).
We’ve now noticed it won’t finish the cycle and tap light is on, but nothing getting warm either. It probably gets through about 3/4 cycle.
It seems to be pumping water out fine...
Hi Devs
Sorry to drag up old post, but googling this control panel and up popped this thread.
Would you mind sharing what the display looks like when running all correctly? we had powercut a week ago and I noticed no display or warning light (warning light normally works).
I pressed reset in...
Oh yes, the vent pipe!
Well the job will have to wait a few weeks until my cast is off (ladders tricky with one leg lol)! Unless I can find a victim, er I mean volunteer to help.
Thanks again
Hi Picasso
Yes, this is exactly what i have!
Does this mean that i can change the controller to twin channel (and rewire) or would this not work?
What about comments about it being a gravity HW so cant control heating without water being on? Would this still be the case?
Feel like i...
Thanks for the diagram.
The valve is situated right next to hw cylinder and connects ( via junction box) to Stat on tank, hence why I assumed its for HW. Actually I'm sure it's for HW as when I was messing about adjusting cylinder stat, as it clicked on and off the valve was opening/closing...
Have checked wiring of valve and only 3 of the 6 cores being used.
The orange, grey and white are all taped off with insulation tape and just tucked into box.
Guess that means i dont have a true c type system then and my hw is gravity?
What happens come summer when i dont want CH on, will...
Thanks
How would i tell if gravity or C plan? I was under the impression mine was a C plan as there is a 2 way valve for the HW? The valve is then connected to the cylinder stat.
Hi All
I recently moved into a house with a Baxi back boiler and eventually worked out that it is a C plan system.
I originally had issues with hot water, but replacing the cylinder stat has sorted this out.
Todays question however is about replacing my single channel programmer.
I dont...
I hope it's not me making it even more confusing 😄
Surely fitting a double channel controller won't work as only have 2way valve upon inspection?
Today I phoned estate agent and have asked him to call previous owners to ask how they used to heat hw in summer.
No point asking if...
I can only see one valve. The cable from it goes to a joint box, then connects with 2 other cables, 1 for tank stat and 1 for immersion switch. I have uploaded photo.
I also looked understairs where controller is and there appears to be what I think is a pump ( myson compact). Again photo...