Recent content by mongy1

If my memory serves me correctly, Jack Carter (Michael Caine) used his electric shaver plugged into the ceiling light bulb holder in one scene near the start of Get Carter. Circa 1971! :lol:

My hob specified HO5 RR-F 4mm2. Try getting hold of it though! TLC sell it but it works out at £12.07 for a metre delivered. I used HO7 RN-F 4mm2. Bought from Edmundsons for £3-4.

Easiest way would be to drill through wall, pass appropriate rating flex through the wall, attach to 13amp plug in the kitchen & trailing socket in the lean-to. This would allow the washer to unplugged in the lean to. As for a fused spur... Is it a gas boiler? If so, then the circuit may...

Mastic Asphalt?

This should be adequate for lighting i.e. 1.5mm2 cable. http://www.tlc-direct.co.uk/Products/MTOV16.html?source=froogle Available in a DIY shed near you. Paid around a quid at Bodgit & Quit.

I fitted a flex outlet behind the 'chimney' (cover piece, filtered hood not externally vented) with labelled fcu in the loft. Easy to get to as it's a bungalow with boarded loft. Obviously that's not going to be the solution for every situation. Originally had a socket behind the 'chimney' with...

How many cores are in the cable? Blue & brown you have mentioned. Is there an earth? Green & yellow? Might be an import if no earth.

I used 20mm oval stuff from B & Q. Just protects the cable from the plasterer.

Due to having a small kitchen, I am fitting a 500mm sink unit with sink to fit. The waste system supplied is huge, will be a struggle to fit & will leave little room for anything else in the cupboard. Any suggestions please for a smaller waste system which will drain sink/ overflow & washing...

Cliff Richard lyric? How about 'Power to all our friends'? I'll get me coat...

Also keep screwdrivers out of their reach :D

Some kids are a bit handy with screwdrivers though. Stick a blob of filler over the screws in the blanking plate.

Hi. Had notifiable work done by NICEIC registered electrician. How long should it take for paperwork to arrive? Thanks in advance.

Also be aware that your hob will draw more than the oven. 2 rings at full tilt will draw more!

I have a similar oven from Ikea, they are made by Whirlpool. I had to phone the Ikea help line to find out that it was 2.4Kw & 13 amp as the instructions & website lack this information. Phone them & check. My installation is 6mm2 cable from consumer unit to cooker switch, 6mm2 T&E from...