I have removed the 10.5kw electric shower from my bathroom as we have moved to theromastic shower supplied by the combi and terminated the wire
I would like to repurpose the cable for a simple LED Cabinet we are putting on the wall which needs power
I have terminated the 10mm cable (which is...
So just shut the boiler down and drain from any radiator outlet (the one I plan to cut for example), do the work, and then just refill the boiler? Dont do any draining at the boiler itself?
I need to move the existing radiator pipes due to an upstairs bathroom renovation as we are relocating them for the install of a new radiator.
I have isolated, drained and removed the radiator, however after mapping out the piping one of the pipes is long enough to be 'bent' to the new location...
We have just got a top end boiler, and are ready to ditch the electric shower. As such I now need to put in a hot water supply to the shower which is currently only cold only. We have no problems with water pressure which is pretty epic since we got rid of the water bottle.
here is a (cough)...
two 90 is all I need though the first one, to be fair is ‘out the bowl and immediately right’ if that makes sense, just was making sure that was “acceptable” though I can make them slightly softer than 90. Thanks for the reassurance
It can, I just want to make sure the 's' that the waste pipe will end up being i.e 'back of toilet turning right immediately, on a little, turn left into external pipe connector' is ok and I don't need to soften the 45 degree angles a little for good flow of waste
Note we cant drill any new...
We are gutting and redesigning our entire bathroom which is an 80's disaster of peach and frilly horror. Please see the photo of our current bathroom (de-tiling underway)+ current toilet layout, and my (cough) technical diagrams of what is to come
We are building a new half wall which will...