Recent content by mustang

no tap turned on, just switch next to timer and heating full on

switch the hot water on via the switch on the boiler and the central heating comes on, faulty timer?

Not bog standard at all

seems there are quite few sm 500 out there, can anyone shed any light on them

It wasnt my boiler thats sludged

thanx, it was the plates

any ideas y i have only luke warm water when burner is on and flames seem ok. cud it be sludge in sec h/e or thermister?

its a 500 installed in property, rather old and decrepid but it is a 500, should be able to replace with a 600

is there such a timer as a switchmaster 500

boiler removed, new fitted. broke boiler down found nothing. no manual to see if restrictor missing

Do seem to be a restriction missing, although i cannot see where it would fit, looks very basic method of operating yet cannot get it to go. real strange. :shock:

well, replaced pump, diverter valve, secondary h/e, diaphragm, flused all pipework removed and inspected all pipes that i could. Put back together and now the pin on flow switch does not operate at even on htg unless i turn off flow/return valves on boiler and then htg works until o/heat. run...

bit of a mare really, tried everything, like to know what the problem is, lost 5hrs to it so want to find out. will let you know outcome

Yes it is a wilo pump and it does have the longer shaft, this problem a challenge between me and the boiler now,its got personal but i'll win, think i'll try another pump as it the only thing inot really leaned out, main h/e seems fine and clear

had it all apart, pump seems fine and strong, chtg mode pin hits flow switch and moves easy and makes the contact, turn on tap for hw and pin drops breaking flow switch and just leaving pump running. turn off tap pin rises and htg works fine, this boiler going to end up in bin very soon :evil: