Just got this twin shower diverter but its leaking from all the inlets/outlets with the connectors I bought. They fit...but are a bit loose. Tried wrapping them in ptef tape and no different. Are they just the wrong size of is their some trick to this?
I got a 15mm x 3/4 male coupler for the...
Anyone know where you can still buy threaded steel pipe (ideally cut to size) and some flanges like this in the UK still?
http://www.amazon.co.uk/gp/product/B000FPCD6Y/sr=8-3/qid=1368461310/ref=olp_product_details?ie=UTF8&me=&qid=1368461310&seller=&sr=8-3
Its for some diy sheaving units but...
Started ripping the tiles off my kitchen wall and I was hoping to paint the wall but its ripped big chunks of the plaster off. Is the only way to get a good finish on this by skimming it?
I wish I had done the work myself now but I was really pushed for time and didnt fancy chasing it all with a bolster. Anoying as I have done everything else in the house myself! Here is some pics..let me know what you think.
Cables are chased into the walls (pretty shallow).
For the sockets all cables run horizontal between outlets, but does go round a alcove and 2 corners so not sure this was still considered a safe zone?
For the switch the wire goes horizontal from the old switch...but thats no longer their...
Not 100% but I think its a ring circuit as every socket in the flat seems to have incoming/outgoing wires.
Only a 1 bed flat with original 5 single sockets on the circuit but has a 35A fuse at the rcd (if thats the right term)
Apparently he is part-p certified but I didnt actually see the...
I am no electrician but I got one in to add 2 new sockets and move a switch and some things dont seem to quite add up after I investigated the work the next day...
Added first socket as a spur of a original one, and then extended this to another spur
No insulation on the earth cable inside...
I need to put in some new plumbing for a washing machine. Washing machine will sit in the airing cuboard next to the bathroom.
My thoughts were to install a T-junction after the bath trap, run a new waste pipe through into the cupboard and attatch to a washing machine trap...
Got this old fireplace which has been bricked up and need to cover it in something in order to match the plaster around it and finally paint the whole room.
Whats the best option? Was thinking of covering with a piece of plasterboard and filling the edges to save cash on getting a plasterer...