Thanks no seal
I was just wondering the thickness is sufficient.
I'll be constructing the frame work as per pic but rafters will sit on back wall plate which means cutting notchs out
Should the rafters also be 4x2. Or would 2by2 will do?
Quick question on timber,
the UPVC thickness is about 75mm
what size thickness should my roof frame be constructed with?
A 4"x2" will only be around 45mm thick, will that be sufficient?
mind you i will need to drive screws through the upvc on to the frame above, so what thickness do...
Thanks Gazman
Quick question on timber,
the UPVC thickness is about 75mm
what should my roof frame be constructed with?
A 4"x2" will only be around 45mm thick, will that be sufficient?
mind you i will need to drive screws through the upvc on to the frame above, so what thickness do...
Hi
Just need some assistant and guidance,
I have a 2m x 1m engineering brick base, on which the Cill will sit on top and windows panels and door will sit on top of the cill
The top of the door and panels will be a wooden frame for the roof
My question is:
Do I need to use packers to...
Cool, Think I get the idea , will try post pictures next week as the porch is arriving then, have ordered reinforced windows as well as corner post.
thanks for all you help.
Yeah the post will be reinforce aluminium steel. I'll put less stress on the upvc as possible
Just trying to picture this... "roof as a series of mono-trusses which will largely cantilever off the wall "
Is there any pictures you can point me too.
Thanks
Hi
Im constructing a lean to porch and wondering if anyone can assist in the design i have
The concrete foundation and 1 layer brickwork is already done.
I will be using UPVC panels for the design as shown in the picture.
My concern is the lean to roof. Currently the porch will have 2 corner...
wow, simples as that... appreciate your help guys...
Have 1 or 2 more questions i want to clarify....
on the Inputs and output screen as per below, does anyone one know what each funtion does, (nothing in the manual or anything i could find)
Any\All -
Chime -
Omittable -
Soak -
Double Knock -...
Hi
Wondering if you can help and simplify this as Im confused about the Zones\Areas and night mode.
Here are the list of sensors:
Front Door Contact
Back Door Contact
Back Window Contact
Front Window Contact
Front RM PIR
Extension PIR
Upstairs PIR
Can someone help me what Zones\Areas i need...
Hi
I read multiple sites and still not clear on the wiring for the Hive 2 system.
Attached is diagram, can anyone assist where (1)common and (3)Heating On should go.
Any help appreciated