Recent content by nijx

sorry - don't understand. S2 addehive is the best chance but will also crack?!

boiler spec seems fine for the house I have left the heating on permanently before and notice it does take a while for the temp to go from c30s to 60/70s. But once there it seems to stay around the 60/70s

it's a 4 bed house. How do i determine if it's 'short cycling'? Not watched it... rather boring! I know the water heats up fine though

Valliant 428 (i think) rads do NOT ever get piping hot. I suppose they are at different temperatures (well certainly feel that way)

half the fllor is concrete (that's fine) and the other area seems to be wooden floor boards. think it's simply become loose as you can hear the floor creak underneath so if i remove the grout, it's fairly easy to re-grout? thanks

asked the guys who installed the boiler and they said it's fine... but it's not! was supposedly balanced TRVs on rads rads do heat up, but takes a good while and then it's not piping HOT

hello What should i do with lose floor tiles and where some of the grouting has become lose and disappeared? is there a way to take the existing grout out and reapply grout or something to fix the tiles in place? thanks

hello we recently installed a new boiler (we have a hot water tank & open vent heating system). The boiler works fine as we get hot water. the heating is ridiculously slow as heating up the rads. The system was power flushed when they installed the new boiler. some of the rads take...

Hi I hope someone can offer some advice. We had an extension built 13 years ago, by decent builders who met building regs. There is a bathroom in the extension. The shower area is in a corner and both walls can be seen from the exterior of the property Over the last 6 months we've...