Recent content by notnochippy

Yes tried that. Hot water works on ground floor when heating is on but very intermittent on second floor? All worked perfectly fine until I drained down and refilled system?

Thank you for your swift response, unfortunately it didn't work, any other suggestions gratefully received?

Hi all, I drained down my heating system to relocate a radiator, ever since when trying to use the shower on the second floor( boiler located on ground floor) boiler stops working, fault light- pump or low pressure comes on. Any advice on how I can fix this please. Cheers in advance

No all is on, water coming from hot water tap now , still not heating up

Valve is on

Thanks for your reply, already put a new rad on but nothing is working but even got any running water through hit tap now. I am convinced there must be some sludge blocking the system. Another thing is , when I drained the system 2 out of 3 ground floor rads would not drain and also have no air...

Now no water from hot tap?

And pump still ok

Room stat, boiler does nothing and still no hot water

The pilot light is lit and always has been, problem is when turning the

I have added picture of boiler.

Hi leaky Dave, not sure, what will it look like?

Anybody any ideas?

If u have bled all rads starting at bottom and working way up, bled cold feed in airing cupboard, bled pump, where else could air be trapped?

Yes, I have bled everything. Could it be blocked with sludge?