Recent content by OXHEAD

Hi I am in the process of having a new kitchen fitted,but before the fitter starts in 3 weeks time, I have found the existing paintwork on the walls to have a crazed look.(my wife says I have as well!!) I have removed the 2 different coats of matt emusion down to the original magnolia...

UPDATE I SPOKE WITH THE INSTALLER AND HE SAID THE HOT WATER CYLINDER THERMOSTAT WAS NOT WORKING PROPERLY. AND YES THE PRIMARY SYSTEM HAD QUITE A BIT OF AIR IN IT. BOTH PROBLEMS FIXED BUT HE SUGGESTED FITTING AN AUTO BLEED UNIT TO OFFSET ANY FUTURE PROBLEMS. WHAT DO YOU GUYS THINK...

Thankyou all for your replys, The installer was very concerned today as to what he may or may not have done. Fortunately it was not the Boiler at fault but an electrical error. The problem lay with the Thermostat on the hot water tank which had a live feed into it but no indication to...

Hi The boiler has recently (01/05/09) been fitted and it shows the code S.53, the CH system works fine.No hot water available. The installer is coming tomorrow to check the 3 way valve but I'm wondering if this code is a known problem with these boilers and if so what is the best remedy to...