I had to replace one of the sealed units on a small opening unit of a conservatory. Due to the age of the conservatory, one of the beads was brittle and broke. The conservatory was installed by Anglian windows around 1998 and is externally glazed - can anyone identify the profile please?
Currently have the above with a Fluidmaster Valve & a Ideal Standard Flush Plate .I replaced the valve as the flush is quite difficult to operate & also replaced the air pipe but the problem remains has anyone a recommendation to replace the (9"x6") Flush panel or should I try a different...
Can someone recommend a good brand of concealed flush, I replaced the existing one with a Macdee unit but the flush is still poor - The water level is fine, the pneumatic air tubes are new and not too long.
This is a non condensing boiler, it's about 18 years old and every engineer who has serviced it has said leave it alone & don't change it for a ' condensing boiler' Whilst I accept that Ideal made a troublesome boiler with the Isar/ Icos , I have been happy with this one.But to keep on topic can...
Can anyone suggest what might be causing the above, It's not a Kettling sound - it's more like an asthmatic Parrot! It's has only just started a couple of days ago other than that the Boiler is working fine . ( A Powerflush was carried out about 5 weeks ago)
Whilst I appreciate these are the worst boilers made I have one which is used to heat a Koi pond via a Heat Exchanger and at the moment I can't afford to replace it. The problem is that whist it fires up it for about 2 mins then shuts down. The fan works, boiler fires up and gets hot but no heat...
Ok so here we go , system is a conventional Ideal Classic Boiler ( Downstairs) with open vented system. No problem until this winter and only the upstairs would warm up then hot water was tepid. Motorised valve replaced and hot water back to normal, Bleeding radiators got to be a daily...
The oven light blew last night, so I have replaced the bulb - everything works except the oven light will not turn off!. I have tried powering off for 10 mins then re-setting the clock but still it doesn't turn off. The Cooker is a Siemens HB750550B
A friend had his central heating pump pack up - the plumber said that he is not allowed to replace the existing Grunfoss pump with an identical one . He states that the EU regulations require him to fit an Eco 'A' rated pump is this correct?
Just one Bathroom and one en-suite, the reason I dont want the combi is that firstly my wife really wants to keep the airing cupboard (stops her using the tumble dryer), plus we have appalling low mains water pressure -a standard bath takes about 45 mins to fill - we now have a whole house pump...