danfoss fp720 programmer does not follow the timings i set eg 5.30 to 6 am after 6 the little symbol for hot water is still there and if you change the cylinder stat the boiler fires
I tried resetting the danfoss nothing changed
should i do this the boiler on this morning without the programmer like the Honeywell app
Use a relay - Wire in a strict 230V relay (Such as http://uk.rs-online.com/web/p/products/4334076/) between the boiler switched live and pin 8 on the wiring centre
Use the official "RC" device - The RC...
is there a link on the Internet that is available to do this I enclose a photo of the electric box. not please describe more please? Thank you for all this help
as i see it the boiler turns on a by the programmer but not only at the times it should. the cylinder stat tell tells the boiler and I suppose the three-way valve
the boiler danfoss fp 720 and cylinder sat, three-way valve are all in one place there is solar hot water as a separate system it is a Worcester boiler no frost sat the system is in a boiler room in the house the programmer cylinder stat three-way valve are new