I want to put mdf panelling on my sitting room wall but I don’t know how to deal with the radiators. Do I put panelling behind the radiator or just below the radiator and a bit on the wall below the radiator. There are two in the room
the wine rack unit is this one
https://www.diy-kitchens.com/kitchen-units/wall/wine-rack/150mm-150mm-wall-wine-rack---720-high/wp8168/#.X5sg5C2cZmM
on the other side of the cooker which is a 90cm range cooker will be
like this one...
I am going to fit my kitchen tomorrow but I have a question about end panels on one side of my 90 cm cooker is a 15cm wine unit with no doors on it on the other is a 15cm with pull out and a normal 40cm wall unit do I put the end panel flush to the edge of the wall unit with no door and will...
I am putting in a kitchen but don't know which is best next to the corner unit the 500mm base unit with the sink unit and the 600 bin unit with dishwasher at the end or the 600mm bin unit then sink unit and 500 mm unit. which would be better normal base unit or bin unit next to corner unit (its...
I am putting in a toilet with hidden cistern like this
https://www.victorianplumbing.co.uk/cove-white-500x300mm-wc-unit
There is a 1 cm gap between wall unit and toilet bowl is it ok to leave like that or is there something I can do to get rid of gap
I have brought 2 metres of wood effect laminate to put on my bathroom units 1 350mm one 500mm sink unit 500mm toilet unit 2 25mm cupboards. How do you attach the worktop to the units? the sink goes to the wall and if you put it under there will be a gap between sink and unit so is it screwed...
I have two pipes that need cutting and can't cut them with copper pipe cutter because they are close to the wall and you can't turn a cutter on them any ideas?
I have a 1977 house that had a kitchen extension put in in 1979. So there is an archway with part wall of 50cm on the left hand side and 90 on the right hand side. I am putting a 15cm base cabinet against the 50cm wall should I put an end panel on the whole unit or just the 10cm that is showing?
I have a problem in the shower piping the plumber used 15 mm from the water supply then from the floor of the bathroom to the cut of valve is 10 mm copper pipe but the pipe attached to the shower is 15mm again any reason why he changed from 15 to 10 and back again?