Recent content by peter kelly

thanks guys for all the input will remove the p bend and once again thank u all

so guys what i think ur saying is remove the p bend and as i have this on the shower tray( pic ) is that correct and the hole is restricting flow as its half closed ?

no mate as its all sealed in thats why i had to look from under it in the hall i still cant accesses it as its to high and would have to remove more of the roof and drill thru wooden boards

yes just the shower

hi this is a pic from the hall i opened it the other day just to check if there was any thing i could see as why i have another trap i just connected to the old pipe in the bathroom i didnt know that was there as the floor as 2 lvls each about 8 inchs so i checked to see if any blockage but...

the flex is 40mm dia and its just goes from one end of tray to the other side then drops below the floor(about 8 inch's ) to a p trap then long run along the hall to outlet didnt have problem before i changed trays and flex so its either or i think it is the half blocked hole in the waste maybe...

hi guys and girls need a bit of advice from a plumber or that, i fitted a new low shower tray and its draining very slow i have to switch off power shower to stop water getting close to the top of tray all i changed was tray it came with its own waste trap and connected it with flex pipe as...

hope this helps guys and this was only after a few mins this 2nd pic

hi guys and girls need a bit of advice from a plumber or that, i fitted a new low shower tray and its draining very slow i have to switch off power shower to stop water getting close to the top of tray all i changed was tray it came with its own waste trap and connected it with flex pipe as...

hi guys and girls need a bit of advice from a plumber or that, i fitted a new low shower tray and its draining very slow i have to switch off power shower to stop water getting close to the top of tray all i changed was tray it came with its own waste trap and connected it with flex pipe as...